Samsung Galaxy Tab A 8.0 (2017) SM-T385 Flash File Download

First of all thank you for visiting our website The flash file is only eligible for Samsung Galaxy Tab A. The firmware that we will provide is 100% tested file which will not harm your device we are assured of that.

We’ll list Each of the Stock Firmware Collection for Samsung Galaxy Tab A smartphone. Within this listing we’ll upgrade all of the region on Samsung Galaxy Tab A Stock Firmware set for all versions. Stock ROM on Samsung Galaxy Tab A came from box.

About Samsung Galaxy Tab A

Samsung Galaxy Tab A released in 2017, September. Came out with Android 9.0 (Pie); One , available storage on market with 16GB-microSD, up to 256 GB (dedicated slot), The device runs on Qualcomm MSM8917 Snapdragon 425 (28 nm), It has a single camera feature rear camera- 8MP and single selfie camera- 5MP, The display size is about 8.0 inches, 185.6 cm2 (~70.5% screen-to-body ratio), The RAM of this device is 2GB RAM and with Non-removable Li-Ion 5000 mAh battery

Some Benefits You Will Get After Installing The Stock Firmware

  • Flash Stock Firmware to Fix the Bootloop issue
  • You can Upgrade or Downgrade Samsung Galaxy Tab A
  • Fix Bugs on your device
  • Fixes lag issue or stutter on Samsung Galaxy Tab A
  • Fixes wifi connection issue
  • Back to stock firmware to get back your warranty.

To install the firmware you need to download some important drivers or tools

Note before you install the Stock Firmware

  • Your smartphone must have 70% Of battery charge
  • You need Laptop or a PC to perform to install the firmware
  • You should be using Stock Firmware
  • Back Up your Data

Complete Guide To Install The Firmware

  1. First of all you have to download the USB Driver for your device downlod link is given down below
  2. Get Odin on your pc download link is given up.
  3. Open the Odin file on your computer/Run as administrator.
  4. Download the flash file for your Samsung Galaxy Tab A from Flashfileos.
  5. Get your device into download mode to get…turned off your device, press and hold Volume Down key, Home Key and Power Key.
  6. Click volume up button key to enter download mode
  7. Connect your device to your PC.
  8. Your device must be automatically recognized by Odin. At the lower-left of Odin interface, it ought to show a message that says “Added!” and within the meantime, you must see a blue box at the ID: COM section stating “COM:3”.
  9. “PDA” or “AP” depends on the version of Odin that you used.
  10. Click “Start” to start the flashing method.
  11. Note: Don’t unlplug or take awaya Samsung Galaxy Fold till finished.
  12. It may take up to 5-15 minutes. So, don’t hesitate please wait.

Warning Before You Install The Stock Firmware On Samsung Galaxy Tab A

The Stock Firmware is only created for Samsung Galaxy Tab A. Do not try this firmware file on anyother device. Installing wrong firmware can brick you device or completely dead. It’s will always a good thing to keep a firmware of your device on pc. If you face any problem with the firmware leave a comment in the comment box we will try to fix as fast as possible.

Model: Samsung Galaxy Tab A

File Name: SM-T385_T385DXU3CSI4_T385ODD3CSI2_BNG

Country: Bangladesh

Android version: Android 9

Build number: T385DXU3CSI4

Size: 2.31 GB

Add a Comment

Your email address will not be published. Required fields are marked *