Xiaomi Redmi Note 4G Flash File Download
Xiaomi Redmi Note 4G Flash File Download is given down below in this article. The firmware that we will give is a tested file that will not harm your device we are assured of that.
“Xiaomi Redmi Note 4G Flash File Download”
- Download the MIUI xxx Fastboot ROM for your Xiaomi devices
- Now turn your device off completely. Press the Volume– key and the Power button simultaneously to enter Fastboot mode.
- Once you have entered fast boot mode, you will see the Mi Bunny Fastboot mode picture.
- Now connect the device to the Windows PC/laptop via a micro USB cable.
- You need to double click on the downloaded ROM file to extract it.
- Open the extracted ROM folder, and copy its path on the computer.
- To install Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash tool on your computer.
- Now click on the installer file on your computer and continue the installation. (Ignore the security warning) and select run to continue the installation.
- After installation is completed, open MiFlash.exe and paste the address bar from the ROM file folder path copied in the 6th step. (You can also browse the folder by tapping the Select button).
- If you have pasted the Address code, Now Click on the first button (circled out in yellow) to Refresh, and MiFlash should automatically recognize the device. Then click the second button (circled out in red) to flash the ROM file to the device.
- Your flashing process has started, Now Wait until the progress bar inside MiFlash turns fully green, which means the ROM has been successfully installed. Then your device should automatically boot to the new version.
- You have successfully installed the MIUI Stock ROM on Xiaomi device by following the step above.
Download Setup And Install Mi Flash Tool Latest Version
Download Setup and install Xiaomi Mi USB Driver
Firmware Download: Click Here